Relton-TG-Carbide

We will be closed on Thursday, November 23rd & Friday, November 24th for the Thanksgiving holiday

PipeMan Products, Inc. 1-877-747-3626

1-877-PIPEMAN

1-877-747-3626

Hours: 7 AM - 4:30 PM PST

0 Product(s) in cart |
Total $0.00 |
Login Status  Login Status

Not logged in

» Login
Check out our Blog

Relton Thin Gauge Hole Cutters TG Series

PipeManProducts.com Relton Thin Gauge Hole Cutters TG Series

Relton has been manufacturing high quality Brazed-Carbide hole saws in the U.S.A. for over 50 years. Each hole saw has actual carbide teeth brazed into the steel body. All are made to be used dry or wet, hand-held or in a stationary drill. If your job requires large numbers of holes, lower your cost per hole with a Relton hole saw. If you burn up high-speed hole saws, or bi-metal saws aren't tough enough, then a Relton Saw is for you. The TG Thin Gauge Series is perfect for sheet metal, stainless steel and thin plastics. They are cost effective and can be inexpensively resharpen and the teeth replaced as needed. Special order in just about any diameter, drill depth or back-plate design.

  • Relton Carbide Tipped Industrial Hole Saw RPM Table
  • Relton Carbide Tipped Industrial Hole Saw OD Chart
  • Relton Factory Repair Schedule
  • Relton Carbide Tipped Hole Saw FAQ

Recommended For: Sheet Metal, Stainless Steel, Thin Plastics, Smooth Clean Holes - Easy Plug Removal - Non-Removable. Shank and Special Sizes upon Request

To Purchase Go to Bottom of Page

Specifications:

  • Long Lasting Carbide Tipped Hole Saw
  • 1/4" Drilling Depth Standard
  • Standard Pilot: Carbide
  • Standard Shank Length: 3.00" O.A.
  • Non-removable Shank
  • CAUTION: Cutting tool may break or shatter under improper use. Government regulations requires the use of safety glasses and other appropriate safety gear at all times in the area of use

Complete - Includes carbide hole saw, 1/2x3 Shank, Ejector Spring, and Carbide pilot

HO - Includes carbide hole saw only


Diameter

Complete with Shank, Pilot & Ejector Spring

Cutter-Head Only

Part No.

Price

Wt.(lbs)

Part No.

Price

Wt.(lbs)

3/4"

TG-12

$ 54.00

0.2

TG-12

$ 26.00

0.3

13/16"

TG-13

$ 55.00

0.2

TG-13

$ 27.00

0.3

7/8"

TG-14

$ 56.00

0.2

TG-14

$ 28.00

0.3

1.00"

TG-16

$ 58.00

0.3

TG-16

$ 30.00

0.3

1 1/16"

TG-17

$ 61.00

0.3

TG-17

$ 33.00

0.4

1 1/8"

TG-18

$ 63.00

0.3

TG-18

$ 35.00

0.4

1 7/32"

TG-195

$ 64.00

0.3

TG-195

$ 36.00

0.5

1 1/4"

TG-20

$ 66.00

0.3

TG-20

$ 38.00

0.5

1 5/16"

TG-21

$ 67.00

0.3

TG-21

$ 39.00

0.6

1 3/8"

TG-22

$ 68.00

0.3

TG-22

$ 40.00

0.6

1 7/16"

TG-23

$ 69.00

0.3

TG-23

$ 41.00

0.6

1 1/2"

TG-24

$ 74.00

0.3

TG-24

$ 46.00

0.7

1 5/8"

TG-26

$ 83.00

0.3

TG-26

$ 55.00

0.7

1 3/4"

TG-28

$ 86.00

0.4

TG-28

$ 58.00

0.7

2.00"

TG-32

$ 90.00

0.4

TG-32

$ 62.00

0.8

2 1/8"

TG-34

$ 102.00

0.4

TG-34

$ 74.00

0.8

2 1/4"

TG-36

$103.00

0.5

TG-36

$ 75.00

1.1

2 3/8"

TG-38

$ 104.00

0.5

TG-38

$ 76.00

1.1

2 1/2"

TG-40

$ 106.00

0.5

TG-40

$ 78.00

1.1

Relton Replacement Shanks

S-12 series shank fits 3/4"-7/8" dia saws (1/2-13tpi)

         
         
 
         
         
         
 
 
04Z-NRT-RapidTap-Metal-Cutting-Fluid-R
$3.99
 
Add to cart
 
TG_Carbide_HoleSaw_Complete
$54.00
Add to cart
 
TG_Carbide_HoleSaw_Head_Only
$26.00
Add to cart
 
TG_Pilot_TGP-4
$9.00
 
Add to cart
 
TG_Spring_Ejector_ES-40
$3.00
 
Add to cart

We Specialize in Hot Tapping, Line Stopping, Pipe Freezing, and Commercial Pipe Repair Products!