Hot Tap Cutters and Hole Saws

Recommended For: steel, aluminum, brass, cast iron, plastic or wood

• • 1-7/8" cutting depth (Deepest standard cutting depth available)
• • Available in 9/16” to 6.00” diameters
• • M-42 Cobalt Bi-Metal Construction - Up to 24% Longer Life
• • 4/6 variable tooth design and Thin 0.044" Kerf for faster and smoother cuts

Recommended For: Wood laminates, fiberglass, plywood or tile.

• • 1-5/8" cutting depth (Deepest standard cutting depth available)
• • Available in 11/16” to 6.00” diameters
• • 3 teeth per inch for smoother cut
• • Provides up to 10 times greater tool life on abrasive materials

Recommended For: steel, aluminum, brass, cast iron, plastic or wood

• • 1-7/8" cutting depth (Deepest standard cutting depth available)
• • M-42 Cobalt Bi-Metal Construction - Up to 24% Longer Life
• • Available in 7 to 20 piece kits for electrical, plumbers etc.
• • Includes: Mandrels, Adapters and Carrying Case

Recommended For: steel, aluminum, brass, cast iron, plastic or wood

• • Available in 7/8” dia to 6.00” diameters and 3.25, 4.50 or 6.00” Drill Depths
• • M-42 Cobalt Bi-Metal Construction - Up to 24% Longer Life
• • Uses any standard or Heavy Duty Mandrel
• • 4/6 variable tooth design and thin 0.044" Kerf for faster and smoother cuts

Recommended For: Wood laminates, fiberglass, plywood or tile

• • Available in 7/8” dia to 6.00” diameters and 3.25, 4.50 or 5.70” Drill Depths
• • Carbide-Tipped teeth: Efficiently cut abrasive materials
• • 3 teeth per inch for smoother cut
• • Provides up to 10 times greater tool life on abrasive materials

Recommended For: Primary Hot Tap use on: ACP, CI, DI, CLMC, and PCCP Pipe

• • Relton STHS Hot Tap Cutters made specifically for TM-1 Pro Series Hot Tap machine
• • Carbide Tipped Shell Cutters with standard 5-hole or 7-hole hole saw back-plate
• • Select Hot Tap Sizes for 4" to 6" Hot Taps with 3.375" drill depth
• • Can be re-tipped or resharpened

Recommended For: metal, plastic, wood, laminates, tile and more

• • Stock sizes 11/16" to 4" diameters
• • Complete - Includes carbide hole saw, 1/2x3 Shank, Ejector Spring, and Steel pilot
• • HO - Only includes carbide hole saw
• • Special order up to 40” diameter and 48” drill depth

Recommended For: All Blu-Mol Standard Hole Saws

• • Works with all Standard Hole Saws
• • Arbors
• • Pilots

Recommended For: All Relton Hole Saws

• • Arbors
• • Pilots
• • Ejector Springs