Line stopping is a method of isolating a piping system to provide a shut off where none exists while the pressurized system is under full operating pressure. The Line Stop procedure serves as a temporary valve that can be removed after modifications or valve replacements have been made. It is completed after a hot tap procedure has been first performed. The Qualitech Line Stop Equipment is the most cost effective on the marketA line stop usually consists of four parts: 1. Line Stop Sleeve, 2. Valve, 3. Machine and 4. Flexible Cup or Stopper. The smaller line stops are usually completed with Qualitech Line Equipment.

Qualitech Line Stop machines are an affordable way to perform a line stop and eliminate draining the system. Originally made for use with Weld-on Carbon Steel fittings for natural gas lines, they can also be used for waterworks applications. The machines are easy to use and available in 3/4" to 1.00" , 1-1/4" to 1-1/2" , 1-1/2" -2-1/2" , 3.00" to 4.00" , and 5.00"-6.00" Line Stop systems. If you want to add reliable line stop equipment used by pros for over 30-years as line stopping services you offer, then the Qualitech Line Stop Systems are for you. Call for availability in CA, NV, AZ, CO, NM, ID, MT, UT and WY.

Eliminate Shut-downs and Draining the System!

Models

• Model 1001 - for 3/4" and 1.00" Line Stops
• Model 1251 - for 1-1/4" and 1-1/2" Line Stops
• Model 2001 - for 1-1/2", 2.00" and 2-1/2" Line Stops
• Model 4001 - for 3.00" Line Stops
• Model 4001 - for 4.00" Line Stops
• Model 6001 - for 6.00" Line Stops

Not available in No. California, Nevada, Arizona, Colorado, Montana, Wyoming, New Mexico and Utah.

Due to the variable weights and shipping options this product is only
available to order by phone. Call 1-877-PIPEMAN (1-877-747-3626)