1-877-PIPEMAN
1-877-747-3626
Hours: 7 AM to 4:00 PM Mon-Fri PST
Jet Swet Plumbing Plugs
How Do Plumbing Plugs Work?
Jet Swets Plumbing Plugs are the original, professional tool of choice for soldering with the water in the line. You can't solder a copper tube with water still in the line. Plumbing Plugs save time and helps eliminatedraining the system in many cases when doing a repair. Building maintenace departments are usually under the gun to keep water flowing in a building. Usually a the building's water cannot be shut down more than a couple of minutes. In the case of plumbers, repeat customers are more likely to keep coming back when a job can be done more efficiently for a lower cost. Plumber's can do more jobs in a day when time can be redeemed with a great tool.
The benefits of Jet Swet plumbing plug tools will save you time and effort when repairing pipe. Jet Swet tools allow you to begin repairing right away - no more waiting for the water to completely drain. You will have immediate control over draining or siphoning water as well. Your equipment overhead costs will be lowered and with these sturdy and professional plumbing plugs, you can service hotels, motels, apartment buildings, hospitals & much more!
Recommended For: Sched 40/80 PVC, Steel Pipe Galvanized or Black and M or L Copper
- • Six different kits available 1/2" to 2.00"
- • Rated at 55-60 PSI based on size
- • Gasket is a special EPDM/Silicon composite
- • One Year Limited Warranty except for replacement gaskets
Recommended For: Sched 40/80 PVC, Steel Pipe Galvanized or Black and M or L Copper
- • Nine different tools available 1/2" to 4.00"
- • Rated at 55-60 PSI based on size
- • Gasket is a special EPDM/Silicon composite
- • One Year Limited Warranty except for replacement gaskets
Recommended For: Sched 40/80 PVC, Steel Pipe Galvanized or Black and M or L Copper
- • Available in sizes 1-1/2" to 6.00"
- • 3/4" Hose Outlet for relief of high pressure jobs
- • Gasket is a special EPDM/Silicon composite
- • One Year Limited Warranty except for replacement gaskets
Recommended For: All Jet Swet products
- • Available in sizes 1/2" to 4.00" standard units and 1-1/2" to 6.00" Flo-Thru units
- • 1/2"-1.00" kits come with replacement washers and nuts
- • 1/2" to 2.00" Gasket Only Kit now available
- • Gasket is a special EPDM/Silicon composite
Recommended For: All Jet Swet gaskets
- • 1oz tub of Jet Swet Grease
- • Waterproof marine-grade grease
- • For lubricating under the compression nut after each use
- • Contains enough for a several plus applications
Recommended For: Sched 40/80 PVC, Steel Pipe Galvanized or Black and M or L Copper
- • Available in Kit Size 1/2" to 1.00" / 1/2" to 2.00" (Kit)
- • Easy to use on straight or curved pipe
- • Gasket is a special composite
- • One-year guarantee on parts and labor
