1-877-PIPEMAN
1-877-747-3626
Hours: 7 AM to 4:00 PM Mon-Fri PST
Tapping Sleeves
Tapping Sleeves Innovative Pipeline Products
Tapping Sleeves are used when tapping into a pipe while it is under pressure. Hot Tapping Sleeves come in a variety of styles; Shop Coated Carbon Steel, Epoxy Coated Carbon Steel or All 304 or 316 Stainless Steel. Tapping Sleeves are normally flanged, but smaller sizes can come with threaded outlets. Hot Tapping Sleeves can be bolted on or weld depending on the application.
Recommended For: Copper Tubing
- • Available 3/4" to 8" dia and size-on-size: 3/4" dia x 3/4", to 4.00" dia x 4.00"
- • Suitable for Water, Sewer (150 PSI)
- • Exact fit Full Circle GorillaGrip™ Buna-N Waffle Gasket Design Rated -40° to +180° F sustained
- • NSF ANSI 61 and 61G Certified by WQA
Recommended For: Steel and PVC Pipe
- • Available 3/4" to 8" dia and size-on-size: 3/4" dia x 3/4", to 4.00" dia x 4.00"
- • Suitable for Water, Sewer (150 PSI)
- • Exact fit Full Circle GorillaGrip™ Buna-N Waffle Gasket Design Rated -40° to +180° F sustained
- • NSF ANSI 61 and 61G Certified by WQA
Recommended For: DI, C900, HDPE, SS, and Thin Wall Pipe
- • Available 6"-30" with flanged outlet sizes 3.00"-12.00" (14"-60" w/ flanged outlets 3.00"-12.00" for HDPE)
- • Suitable for Water, Sewer to 175 PSI maximum for 3.00" to 12.00" (Call for rating on larger sizes)
- • NBR Outlet Seal Rated -40° to +212° F with 3/4" Forged Steel test Outlet
- • NSF ANSI 61 Certified by NSF
Recommended Primarily For: Steel, PVC, DI, and Thin Wall Pipe
- • Available 2"-54" with 3/4"-4.00" IP Thread Outlets – Avalable with optional Epoxy Coating or SS Hardware
- • Suitable for Service Connections, Air Relief Valve Connections, taps on larger A/C, CI, DI, PVC and RCP Pipe
- • NBR Outlet Seal Rated -40° to +212° F Rated up to 250 PSI maximum
- • NSF ANSI 61 Certified by NSF
Recommended For: Steel, PVC, C900, DI, CI, ACP, RCP and Thin Wall Pipe in corrosive conditions
- • Available 4.00" to 24.00" with outlet sizes 2.00" to 8.00" including size-on-size up to 8" x 8"
- • Suitable for Service Connections, Air Relief Valve Connections, taps on larger A/C, CI, DI, PVC and RCP Pipe
- • SBR Full Circle Gasket Rated -40° to +150° F and Rated up to 250 PSI maximum
- • NSF ANSI 61 Certified by NSF
Recommended For: DI, PVC, PE and Steel Pipe for Higher Safety and Pressure Capability
- • Available 4.00" to 30.00" with outlet sizes 3.00" to 12.00" including size-on-size up to 12" x 12"
- • Suitable for Service Connections, Air Relief Valve Connections, taps on larger A/C, CI, DI, PVC and RCP Pipe
- • SBR Full Circle Gasket Rated -40° to +150° F and Rated up to 250 PSI maximum
- • NSF ANSI 61 Certified by NSF
Recommended Primarily For: Steel, PVC, DI, and Thin Wall Pipe in corrosive conditions
- • Available 2"-54" with 3/4"-4.00" IP Thread Outlets
- • Suitable for Service Connections, Air Relief Valve Connections, taps on larger A/C, CI, DI, PVC and RCP Pipe
- • NBR Outlet Seal Rated -40° to +212° F and up to 250 PSI maximum
- • NSF ANSI 61 Certified by NSF
Recommended For: Steel and PVC Pipe (Exact fit O.D.)
- • Available 6.00" to 30.00" with flanged outlet sizes 3.00" to 12.00" (14"-60" w/ flanged outlets 2"-12" for HDPE)
- • NBR Outlet Seal Rated -40° to +212° F
- • NSF ANSI 61 Certified by NSF
- • Optional: Epoxy Coat and Bolts (EEB), and Epoxy Coat and S/S Bolts (ESS)
